A Spiral Fry machine for cutting French fries fryer machinees into multiple helical strips wherein the French fries fryer machine is rotated and moved toward a Tornado Fries cutter having a series of parallel scoring knives projecting toward the French fries fryer machine and extending along a radial line with respect to the axis of rotation of the French fries fryer machine.
A slicing blade likewise extending radially is disposed at right angles to the axis of rotation of the French fries fryer machine for continuously slicing off the scored portions. A carriage has a driving motor mounted thereon and the driving motor has a driven shaft which terminates in a French fries fryer machine-engaging and supporting element having prongs for engaging the French fries fryer machine to support the same and cause rotation thereof with said shaft.
The Ribbon fry machine has a base member to which the cutter is attached and the base member has longitudinal guide means at opposite sides thereof in which the carriage is guided for free longitudinal movement toward and away from the cutter in a direction
Specifications
Tornado French fries fryer machine Machine
French fries fryer machine cutting machine
Cutting equipment
Cutting Machine TT-F138/F139 (French fries fryer machine cutting machine,cutting equipment)
Efficiency:200kg/hour
Power:1.5kw/380v
Weight: 60kg
Material:S/S
Efficiency:300-500kg/hour
Power:3kw/380v
Machinery presents French fries fryer machine Cutting Machine. The French fries fryer machine Cutting Machine is specially designed for slicing the French fries fryer machine, with the help of cutting plate. The French fries fryer machine Cutting Machine has different types of plate, named as sally plate and raffle plate. French fries fryer machine Cutting Machine is used for cutting French fries fryer machine in different shapes and design. All plates have adjustable blade. The machine avoids the deposition of broken pieces in the dye. It is hand press type French fries fryer machine slicer. The technical specifications of the French fries fryer machine Cutting Machine are:
Specification: 1/2" Hp Motor, 100 kg/hr machine capacity.
Dimension: 16"x13"x34"ht.
Weight: 55kg.Approx
Electric Use: 220 Volt or 440 Volt
Urschel Laboratories offers the French fries fryer machine processing equipment listed below including French fries fryer machine chip slices, French fries fryer machine dicers and curved chips cutters for french fries. Urschel quality is built into every cutter the company manufactures.
Below you will find our selection of French fries fryer machine processing machines. Each of the following vegetable cutting machines offers different kinds of cuts.
French fries French fries fryer machine Slicer - French fries fryer machine processing equipment that produces 1/32 to 3/4" (.8 to 19.1 mm) straight or crinkle French fries on skewer. Capacity up to 15,000 lbs (7,000 kg) per hour.
French fries cutter Flat slices up to 3-1/2" (76.2 mm). Optional circular vertical knife assembly can be used for halving large french fries on sausage French fries fryer machinees lengthwise for pre cutting prior to shredding and other processes. French fries French fries fryer machine machine - French fries fryer machine processing equipment to produce French fries on sausage 1/32 to 1/8" (0.8 to 3.2 mm) plain or crinkle slices for French fries fryer machine chips and flakes. Parts are available for slice thickness up to 1/2" (12.7 mm). Approximate hourly capacity of 1/16" (1.6 mm) slices: 2,000 lb (900 kg).
Spiral friesfries fryer machine processing equipment that produces 1/10, 1/8, 3/16, or 1/4" (2.5, 3.2, 4.8, or 6.4 mm) or other slice thickness. Choose either plain or crinkle cuts. French fries fryer machinees must not exceed 2-3/4" (70 mm) in diameter and oblong varieties will be sliced crosswise producing round slices. Approximate hourly capacity: 4,000 to 6,000 lb (1,800 to 2,700 kg).
Ribbon French fries fryer machine Cutter 1/8 to 1" (1.6 to 25.4 mm) dices and pieces such as 1/8 x 1 x 1/8" (3.2 x 25.4 x 3.2 mm) from cooked product. Input product dimension should not exceed 10" (254 mm) in any dimension. Capacities up to 40,000 lb (18,000 kg) hourly depending on product quality.
Spiral friesfries fryer machine cutter 1/8 to 1" (1.6 to 25.4 mm) dices and pieces such as 1/8 x 1 x 1/8" (3.2 x 25.4 x 3.2 mm) from cooked product. Input product dimension should not exceed 6.5" (165.1 mm) in any dimension.
Spiral Fry Slicer 5/32 to 1" (4 to 25 mm) dices and pieces such as 1/8 x 1/8 x 1" (3.2 x 3.2 x 25.4 mm) from cooked French fries fryer machinees. Input product dimension should not exceed 10" (254 mm) in any dimension.
Spiral Fry French fries fryer machine machine1/4, 3/8, 7/16, 1/2, 5/8, or 3/4" (6.4, 9.5, 11.1, 12.7, 15.9, or 19.1 mm) cubes or french fry cuts, and pieces such as 1/4 x 3/8 x 1/2" (6.4 x 9.5 x 12.7 mm) or 1/8 x 3/4 x 3/4" (3.2 x 19.1 x 19.1 mm). Capacity is 18,000 lb (8,000 kg) of 3/8" (9.5 mm) cubes or strips hourly.
Remove circular knife spindle to produce Spiral friesfries fryer machine on sticks cuts. French fries fryer machinees must not exceed 5-1/4" (130 mm) in length for correct feeding to ensure highest yield of uniform, full size strips. Suggested feed rate for french fry cuts with maximum length is lower because of orientation.
Use this machine to produce all smooth cuts listed for the G-A Dicer as well as cuts with 2 or 4 crinkle sides by proper selection of slicing and crosscut knives. Crinkle French fry cuts will have overall cross sectional measurements of 11/32, 7/16, 1/2 or 9/16" (8.7, 11, 13 or 14 mm). Capacity and specifications are otherwise similar to the G-A Dicer. Note: Installation of the circular knife spindle with knives spaced at 1, 1-1/2 or 2" (25, 38 or 51 mm) may be desirable if French fry cuts of uniform length are necessary for packaging or portion control.
3/4, 7/8 and 1" (19, 22 and 25 mm) cubes and pieces as large as 1 x 1-3/4 x 1-3/4" (25 x 44 x 44 mm) or as small as 1/8 x 3/4 x 1/8" (3.2 x 19 x 3.2 mm). Approximate hourly capacity of 3/4" (19 mm) cuts: 25,000 lb (11,000 kg). Note: G-A, GK-A and H-A Dicers can be used as slicers only by removing the circular knife and crosscut knife spindles and installing an inner discharge chute. Capacities will be the same as shown for dicing or strip cutting.
French fries French fries fryer machine Cutter - straight slices from 1/16 to 1-1/8" (1.6 to 28.6 mm), crinkle slices from 1/4 to 1-1/8" (6.4 to 28.6 mm), dices from 5/32 to 1" (4 to 25 mm), and various straight and crinkle strip cuts such as 1/2 x 1 x 1" (13 x 25 x 25 mm) and 1-1/8 x 1-3/4 x 1-3/4" (28.4 x 44.5 x 44.5 mm). Maximum indeed dimension of 10" (254 mm) in any dimension. Approximate hourly capacity: 22,000 lbs (10,000 kg) at 7/16” (11 mm) slice setting.
Spiral friesfries fryer machine Manufacturer 9/32, 5/16, 3/8, 7/16, 1/2 or 7/8" (7.1, 7.9, 9.5, 11, 13 or 22 mm) smooth Spiral friesfries fryer machine on stick and 11/32, 3/8, 7/16, 1/2 or 9/16" (8.7, 9.5, 11, 13 or 14 mm) crinkle cuts. Use French fries fryer machinees up to 9" (230 mm) in length. Integral feed chute and advanced impeller design provide maximum recovery of straight, full length French fries on sausage cuts, free from cracks and feather edges. Feed at uniform rate of 14,000 - 16,000 lbs. (6,400 - 7,300 kg) hourly for highest quality and minimum waste. Two moving parts and massive construction ensures long operating life with low maintenance costs.
Tornado French fries fryer machine Slicer 156, .188, .218, .250, .281, .290, .313, .344, .375, .406, .438, .469, .500, .560, .563, .625, or .750" (4.0 4.8, 5.5, 6.4, 7.1, 7.4, 8.0, 8.7, 9.5, 10.3, 11.1, 11.9, 12.7, 14.2, 14.3, 15.9, or 19.1 mm) square strips, .281 x .406" (7.1 x 9.5 mm), .281 x .594" (7.1 x 15.1 mm), .290 x .313" (7.4 x 8.0 mm), .313 x .375" (8.0 x 9.5 mm), .313 x .750" (9.5 x 19.1), .315 x .385" (8.0 x 9.8 mm), .330 x .395" (8.4 x 10.0 mm), .344 x .469" (8.7 x 11.9 mm), .375 X .750" (9.5 x 19.1 mm), .438 x .750" (11.1 x 19.1 mm), .438 x .875" (11.1 x 22.2 mm) rectangular strips. Approximate hourly capacity: 8,000 to 10,000 lb (3,600 to 4,500 kg).
French fries Cutter Variety of square strips, rectangular strips, and slab cuts. Blades are held together by tension and do not have a sharp edge. This head may be used in conjunction with the french fries on skewer or on types of water propelled systems.
Spiral Fry Cutter is a cutting unit only, not a complete machine, to be integrated into French fries fryer machine processing lines with water gun systems. .250, .281, .290, .313, .344, .375, .406, .438, .469, .500, .563, .625" (6.4, 7.1, 7.4, 8.0, 8.7, 9.5, 10, 11, 12, 13, 14, 16 mm) square strips and .281 x .406", .281 x .594", .290 x .313", .313 x .375", .438 x .750", .438 x .875" (7.1 x 10 mm, 7.1 x 15 mm, 7.4 x 8.0 mm, 8.0 x 9.5 mm, 11 x 19 mm, 11 x 22 mm) rectangular strips can be cut. In addition the Model 360 can produce a wedge cut of 4, 8 or 12 segments. Capacity is dependent on French fries on hot dogs user's water gun system. Note: Successful dicing or slicing of cooked French fries fryer machinees requires rigid control of cooking and thorough chilling before cutting. Applications requiring dicing or slicing of cooked French fries fryer machinees should be referred to your Sales Engineer for review.
French fries Maker – 1/8, 5/32, 3/16 or 1/4" (3.2, 4.0, 4.8 or 6.4 mm) square, random length, french fries on hot dogs cuts using special feed roll and circular knife spindles. Install crosscut knife spindle to cut strips into 3/4, 1, 1-1/8 or 1-1/2" (19, 25, 29 or 38 mm) lengths for special packaging or portion control requirements. Approximate hourly capacity of 5/32" (4.0 mm) cuts: 7,500 lb (3,400 kg); Approximate hourly capacity hourly of 1/4" (6.4 mm) cuts: 12,000 lb (5,500 kg).
French fries machine – 3/32, 3/16, or 1/4" (2.4, 4.8, or 6.4 mm) cuts, random length and French fries on stick measuring 1/16 x 3/16" (1.6 x 4.8 mm) or 3/16 x 3/8" (4.8 x 9.5 mm) from French fries fryer machinees not exceeding 4" (102 mm) in length or diameter. Approximate hourly capacity of 3/16" (4.8 mm) cuts using special slicing head and impeller: 12,000 lb (5,500 kg).